ARCA 2600 DIGANOSTIC SOFTWARE

• Related Articles

• INSTALLING THE USB CROSSMATCH VERIFIER

  USB Support For The Crossmatch Verifier Was Added With Scrap Dragon Version 6.4i Do not plug in the Verifier until the USB_SDK software has been installed and the system rebooted. Download the “USB SDK for Verifier 300LC and 310LC” from the ...

• GW 312 SERIAL TO IP SETUP FOR SCALE

  GW 312 Setup For Scales Plug the GW312 to a power source. Connect Network cable from GW312 to switch or hub on the network. Connect scale(s) to the serial connection on the GW312. Run monitor.exe from the software cd that came with the GW 312. Click ...

• ATM Installation & Scope of Project

  Installation Site Preparation: An appropriate site should be chosen for the ATM. TranAct recommends the walk up, rear load, through the wall ATM's for scrap yards but lobby front load units are sometimes needed. Drive up ATM's are not practical in ...

• ATM QUICK REFERENCE AND TROUBLE SHOOTING GUIDE

  “The ATM is Down.” This is what we are trying to prevent with this manual. It’s a machine, you will have to have a backup plan to keep your business moving. The good news is that if you manage your ATM you won’t have to use your backup plan often. If ...

• STAR TUP 942 – INSTALLATION & SETUP

  Please see attached documents for Installation & Setup Instructions.