CHANGING SERVER ADDRESS IN PERSONA ATM

Set the NORMAL/SUPERVISOR switch to SUPERVISOR.
This should bring you to the “Replenish” menu. NOTE: If the display shows a Fault Status message, press the CNL or CLR key to access the “Select” menu. Then select option 5 for the “Configure” menu.
From this menu select number 99 MORE. This will take you to the second page of the Configure menu. From here select number 37 TCP/IP CONFIG.
To change the server IP select number 0 RMT ADDRESS. Then type in the new IP address pressing ENT after each segment is input.
Press CNL 2 times after you have input the new server IP and the ATM will prompt you to Press CNL to continue or ENT to reboot ATM.
Select ENT and the ATM rear display should display “Committing Network Settings” and then reboot.

Related Articles
ATM QUICK REFERENCE AND TROUBLE SHOOTING GUIDE
“The ATM is Down.” This is what we are trying to prevent with this manual. It’s a machine, you will have to have a backup plan to keep your business moving. The good news is that if you manage your ATM you won’t have to use your backup plan often. If ...
ATM Installation & Scope of Project
Installation Site Preparation: An appropriate site should be chosen for the ATM. TranAct recommends the walk up, rear load, through the wall ATM's for scrap yards but lobby front load units are sometimes needed. Drive up ATM's are not practical in ...
ASSIGNING STATIC IP ADDRESS TO CROSSMATCH VERIFIER 300E
JPEGger requires that a Static IP Address be setup for the Crossmatch Verifier 300E. With multiple verifiers on a network, this can be a problem if the setup is done improperly. When the Verifier is attached to the network, it will be assigned a DHCP ...
P86 ATM STAND ASSEMBLY INSTRUCTIONS
P86 Stand Assembly Documentation
CASH LOADING INSTRUCTIONS FOR NCR P76 ATM
Download file for detailed cash loading instructions for your NCR P76 ATM.

Related Articles