Configuring View Areas in Axis M3007 camera in Jpegger

Configuring View Areas in Axis M3007 camera in Jpegger

This PTZ camera supports multiple views.  I n addition to some predefined views the camera allows the creation of View Areas using PTZ functionality.  Create the desired View Area in the camera.  Then in Jpegger, choose the Axis M3007 as the camera type and choose the View Area using the source number.  This number corresponds to the views in the camera, including the predefined views, so for example View Area 1 would be assigned to source number 5 in Jpegger.
It is possible to use more than 1 view from the camera in a jpegger group.  Just define a different camera for each of the views (source number) using the same IP, user, password, etc. Then create the group to include all of the camera names.


 

    • Related Articles

    • NETWORK CAMERAS CURRENTLY SUPPORTED IN JPEGGER

      The following network cameras are supported in JPEGger. Please note that support can be added for other network cameras provided that they have a way to retrieve a JPEG image via a browser. Please contact TranAct if you have a network camera that ...

    • Configuring Axis Camera - M2025-LE and other newer models

      To capture picture in JPEGger you must make these changes. Open the camera in a browser. Click on SETTINGS in the lower right corner of the screen Click on SYSTEM Click on PLAIN CONFIG Click on NETWORK Find HTTP in the list on the right.  Set it to ...

    • CONFIGURING THE DEFAULT RECEIPT PRINTER FOR NCR P86

      Configuring Default Receipt Printer Switch ATM to supervisor mode. Confirm Select Menu is displayed. Press 5 key then ENTER key. Press 8 key then ENTER key. Press 1 key then ENTER key. Configuration data is displayed. Press the ENTER key. Press 11 ...

    • INSTALLING THE FUJITSU S510, S1500 TITLE SCANNER

      Fujitsu S510, S1500 Install the scan snap manager only, then attach the scanner. I did the minimum install but you might want to also install the full version of adobe acrobat that comes with the scanner. During the install you will be prompted for: ...

    • How to install a Wacom Signature Pad for Scrap Dragon

      The Wacom signature pad was introduced as a better, cheaper alternative to the Topaz signature pad.  The Wacom is driven directly by Scrap Dragon and does not require the Transact Universal Driver.  This offers the following features: The signature ...