NETWORK CAMERAS CURRENTLY SUPPORTED IN JPEGGER

NETWORK CAMERAS CURRENTLY SUPPORTED IN JPEGGER

The following network cameras are supported in JPEGger. Please note that support can be added for other network cameras provided that they have a way to retrieve a JPEG image via a browser. Please contact TranAct if you have a network camera that you’d like to have support for in JPEGger.

  • ACTi Network Camera

  • Arecont Vision

  • Avigilon 4-port Encoder

  • Avigilon Network Camera

  • Axis 4-port Encoder

  • Axis Network Camera

  • Bosch Network Camera

  • CrossMatch Verifier E

  • GeoVision Camera

  • HIK Vision

  • IQEye Network Camera

  • Lilin Network Camera

  • Loftek Nexus 543

  • Mobotix Network Camera

  • Panasonic Network Camera

  • Pixord Network Camera

  • Sanyo Network Camera

  • Sharx Network Camera

  • Sony Network Camera

  • Toshiba IKWB15A

  • Toshiba IKWR01A

  • Toshiba IKWD01A

  • Toshiba IKWB16A

  • Visix Network Camera

  • Vivotek Network Camera

    • Related Articles

    • Configuring View Areas in Axis M3007 camera in Jpegger

      This PTZ camera supports multiple views.  In addition to some predefined views the camera allows the creation of View Areas using PTZ functionality.  Create the desired View Area in the camera.  Then in Jpegger, choose the Axis M3007 as the camera ...

    • Configuring Axis Camera - M2025-LE and other newer models

      To capture picture in JPEGger you must make these changes. Open the camera in a browser. Click on SETTINGS in the lower right corner of the screen Click on SYSTEM Click on PLAIN CONFIG Click on NETWORK Find HTTP in the list on the right.  Set it to ...

    • ASSIGNING STATIC IP ADDRESS TO CROSSMATCH VERIFIER 300E

      JPEGger requires that a Static IP Address be setup for the Crossmatch Verifier 300E. With multiple verifiers on a network, this can be a problem if the setup is done improperly. When the Verifier is attached to the network, it will be assigned a DHCP ...

    • INSTALLING THE FUJITSU S510, S1500 TITLE SCANNER

      Fujitsu S510, S1500 Install the scan snap manager only, then attach the scanner. I did the minimum install but you might want to also install the full version of adobe acrobat that comes with the scanner. During the install you will be prompted for: ...

    • INSTALLING THE USB CROSSMATCH VERIFIER

      USB Support For The Crossmatch Verifier Was Added With Scrap Dragon Version 6.4i Do not plug in the Verifier until the USB_SDK software has been installed and the system rebooted. Download the “USB SDK for Verifier 300LC and 310LC” from the ...