SS34 VOLUME CONFIGURATION

SS34 VOLUME CONFIGURATION

NCR SS34 Volume Configuration

  1. Enter Supervisor Mode.
  2. Replenish Screen will launch.
  3. Press the red CNL button.
  4. Press 7. Diagnostics
  5. Press 8. Self Service Configuration
  6. Press 3. Set Device Configuration
  7. Press 9. Page Down
  8. Press 3. Sounds
    a. Master Volume (0-255)
    b. Wave Volume(0-255)
    c. Midi Volume(0-255)

    • Related Articles

    • NCR CASH CASSETTE MAGNET CONFIGURATION

      Magnet Configuration Of NCR Cassettes – Types 1 Thru 4 Please download the attached document for detailed information.

    • STAR TUP 942 – INSTALLATION & SETUP

      Please see attached documents for Installation & Setup Instructions.

    • CONFIGURING THE DEFAULT RECEIPT PRINTER FOR NCR P86

      Configuring Default Receipt Printer Switch ATM to supervisor mode. Confirm Select Menu is displayed. Press 5 key then ENTER key. Press 8 key then ENTER key. Press 1 key then ENTER key. Configuration data is displayed. Press the ENTER key. Press 11 ...

    • SIGNATURE PAD TROUBLESHOOTING

      First, check that JPEGger is working and that other pictures are being captured. If JPEGger is not working then the Signature Pad will not work. Test the proper function of the pad using the DemoOcx diagnostic. If the pen does not write on the pad in ...

    • ASSIGNING STATIC IP ADDRESS TO CROSSMATCH VERIFIER 300E

      JPEGger requires that a Static IP Address be setup for the Crossmatch Verifier 300E. With multiple verifiers on a network, this can be a problem if the setup is done improperly. When the Verifier is attached to the network, it will be assigned a DHCP ...