STAR TUP 942 – INSTALLATION & SETUP

• Related Articles

• KIOSK INSTALLATION

  See the attached document for more information on Kiosk installation.

• STAR 942 – HOW TO LOAD THE PAPER

  There is semi-automatic paper loading on this printer which is very easy once you get the hang of it.  The first and most important requirement is that the end of the paper be cut straight and square with a pair of scissors.  Do not rip the paper or ...

• ATM Installation & Scope of Project

  Installation Site Preparation: An appropriate site should be chosen for the ATM. TranAct recommends the walk up, rear load, through the wall ATM's for scrap yards but lobby front load units are sometimes needed. Drive up ATM's are not practical in ...

• GW 312 SERIAL TO IP SETUP FOR SCALE

  GW 312 Setup For Scales Plug the GW312 to a power source. Connect Network cable from GW312 to switch or hub on the network. Connect scale(s) to the serial connection on the GW312. Run monitor.exe from the software cd that came with the GW 312. Click ...

• Installing a Desko Icon Passport Snapshell Scanner P5

  Instructions for installing the P5 scanner in Scrap Dragon Classic only, It is currently unsupported in SDX. The installation is straight forward. Login as an administrator. Install the latest Acuant SDK and make sure to check the boxes for both the ...