P86 Dispenser Shutter – Sensor Sensitivity There is currently an issue where a very small number of P86 or P87 ATMs have experienced an issue where sunlight can affect the shutter open/closed sensor for the Cash Dispenser, and to a lesser degree the ...
Changing Persona ATM’s Server IP Set the NORMAL/SUPERVISOR switch to SUPERVISOR. This should bring you to the “Replenish” menu. NOTE: If the display shows a Fault Status message, press the CNL or CLR key to access the “Select” menu. Then select ...
ATM dual dispenses are configured as Primary and Secondary. Looking at the ATM from the safe or rear, the default Primary side of a Persona is on the left but the Self-Serve ATM Primary is defaulted on the right. The Primary side should be loaded to ...
NCR SS34 Volume Configuration Enter Supervisor Mode. Replenish Screen will launch. Press the red CNL button. Press 7. Diagnostics Press 8. Self Service Configuration Press 3. Set Device Configuration Press 9. Page Down Press 3. Sounds a. Master ...
Configuring Default Receipt Printer Switch ATM to supervisor mode. Confirm Select Menu is displayed. Press 5 key then ENTER key. Press 8 key then ENTER key. Press 1 key then ENTER key. Configuration data is displayed. Press the ENTER key. Press 11 ...
“The ATM is Down.” This is what we are trying to prevent with this manual. It’s a machine, you will have to have a backup plan to keep your business moving. The good news is that if you manage your ATM you won’t have to use your backup plan often. If ...
Installation Site Preparation: An appropriate site should be chosen for the ATM. TranAct recommends the walk up, rear load, through the wall ATM's for scrap yards but lobby front load units are sometimes needed. Drive up ATM's are not practical in ...